No extra effort
Connecting WallSwitch to the hub takes less than a minute — it's enough to scan a QR code with the Ajax app. The miniature relay (39×33×18 mm) is easy to place in a recessed wall plate, the body of an electrical appliance, or an electrical panel with DIN Holder. A flexible external antenna ensures stable communication.
WallSwitch Jeweller
WallSwitch is installed in electrical circuits to control the power supply of connected devices. It can function as a momentary or latching switch, with adjustable operating modes in Ajax apps. In pulse mode, activation lasts from 1 to 255 seconds, and relay states can be normally closed or normally open. WallSwitch supports automation scenarios like changes in security mode, scheduled actions, alarm reactions, and responses to temperature, CO2 concentration, humidity changes, and pressing LightSwitch.
Remote power supply control
The Ajax system provides the possibility to configure automation devices and Ajax WaterStop Jeweller in response to an alarm, armed mode change, schedule, or temperature. The security can be programmed to change the security mode by schedule, and the automation device can react to the LightSwitch or Button Jeweller press. Additionally, the user can control automation devices from the KeyPad TouchScreen Jeweller, KeyPad TouchScreen Fibra, KeyPad Outdoor Jeweller, and Superior KeyPad Outdoor Fibra.
Overview:
WallSwitch is a power relay to control 110/230 V~ power supply remotely. The relay power supply is not galvanically isolated with terminal blocks; therefore, WallSwitch switches only the power received at the power supply terminal blocks. The device has an energy consumption meter and features three types of protection: voltage, current, and temperature.
WallSwitch controls the power supply of electrical appliances connected to the circuit with a load of up to 3 kW using Ajax apps, automation scenarios, the function button on the relay, and by pressing Button.
WallSwitch is connected to the Ajax system via the secure Jeweller radio protocol. The communication range is up to 1,000 meters in an open space. The device works only with Ajax radio signal range extenders and hubs.
Key Features:
Control via smartphone
The user can set up the relay configurations and receive notifications in an Ajax app.
Automation scenarios
- By arming/disarming
- By schedule
- By alarm
- By temperature
- By humidity1
- By CO2 concentration1
- By touching LightSwitch / pressing Button
1 Scenarios by humidity and CO2 concentrations are available when LifeQuality Jeweller is added to the system.
Energy consumption monitor
Control of the current, voltage, power, and electric energy consumed by connected appliances.
Adjustable pulse duration2
from 1 to 255 s
Operation modes
- pulse2
- bistable
2 Available on devices with firmware version 5.54.1.0 or later manufactured after March 5, 2020.
Contact state
- normally open
- normally closed
Recommendations
A professional electrician should install the device. The device is designed for indoor use only. It is recommended to mount WallSwitch Jeweller on a DIN rail using DIN Holder, which is sold separately.
WallSwitch Jeweller
Wireless power relay to control 110/230 V~ power supply remotely
Power supply
Power supply voltage
110–230 V ± 10%, 50/60 Hz
Maximum continuous load current
13 A
Output power
up to 3.0 kW (resistive load at 230 V~)
up to 1.5 kW (resistive load at 110 V~)
Average consumption
up to 1 W
Current protection
more than 11 A (when Overcurrent protection is enabled)
more than 13 A (when Overcurrent protection is disabled)
Once the current exceeds the specified level, the device turns off automatically.
Voltage protection for 230 V~ mains electricity
min: 184 V~
max: 253 V~
Once the voltage exceeds the specified levels, the device turns off automatically.
Voltage protection for 110 V~ mains electricity
min: 92 V~
max: 132 V~
Once the voltage exceeds the specified levels, the device turns off automatically.
Temperature protection
over 149 °F
If protection is triggered, the device turns off.
Electric shock protection class
Class II
Communication
Jeweller communication technology
Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced anti-sabotage.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.
Frequency bands
866.0–866.5 MHz
868.0–868.6 MHz
868.7–869.2 MHz
905.0–926.5 MHz
915.85–926.5 MHz
921.0–922.0 MHz
Depends on the sales region.
Maximum effective radiated power (ERP)
up to 25 mW
Radio signal modulation
GFSK
Radio communication range
up to 3,250 ft
Between the relay and a hub (or a range extender) in an open space.
Encrypted communication
All stored and transmitted data are protected by block encryption featuring a dynamic key.
Frequency hopping
To prevent radio interference and jamming.
Key features
Control via smartphone
The user can set up the relay configurations and receive notifications in an Ajax app.
Automation scenarios
- By arming/disarming
- By schedule
- By alarm
- By temperature
- By humidity1
- By CO2 concentration1
- By touching LightSwitch / pressing Button
1 Scenarios by humidity and CO2 concentrations are available when LifeQuality Jeweller is added to the system.
Energy consumption monitor
Control of the current, voltage, power, and electric energy consumed by connected appliances.
Adjustable pulse duration2
from 1 to 255 s
Operation modes
- pulse2
- bistable
2 Available on devices with firmware version 5.54.1.0 or later manufactured after March 5, 2020.
Contact state
- normally open
- normally closed
Recommendations
A professional electrician should install the device. The device is designed for indoor use only. It is recommended to mount WallSwitch Jeweller on a DIN rail using DIN Holder, which is sold separately.
Sabotage protection
Protection against spoofing
device authentication
Communication loss detection
after 36 s
Detection time depends on the Jeweller or Jeweller/Fibra settings.
Enclosure
Dimensions
1.54″ × 1.3″ × 0.71″
Weight
1.06 oz
Operating temperature range
from 32 °F to 147 °F
Operating humidity
up to 75% with no condensation
Protection class
IP20
Colors
Black
Complete set
WallSwitch Jeweller
Wires — 2 pcs.
Quick start guide
Datasheet
