Compact, UISP-ready, 5 GHz WiFi bridge with enhanced surge protection and an optimized radio and antenna.
5 GHz, 10+ km link range
450+ Mbps throughput
Easy mounting
Dedicated spectral analysis radio
Dedicated WiFi management radio
Integrated management network
The Litebeam AC-Gen2 integrates an independent wireless network to speed up and facilitate the installation of the equipment with a mobile device.
Improved Noise Immunity
It also offers improved wind performance. The PowerBeam ac directs RF energy into a more precise beamwidth. By directing energy in one direction, the PowerBeam ac spatially blocks or filters noise, thus improving immunity. This feature is especially important in an area filled with other RF signals of similar or equal frequencies.
Comprehensive Design
Ubiquiti's InnerFeed technology integrates the radio interface into the antenna, so there is no need for cables. This improves performance by eliminating cable losses.
Delivering increased performance due to a faster processor and innovative mechanical design at a low cost, the PowerBeam ac is extremely versatile and cost effective to deploy.
airMAX ac Technology Included
Unlike the standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) protocol allows each client to send and receive data using a pre-assigned time slot scheme scheduled by an intelligent controller.
These time slots will eliminate hidden node collisions and maximize efficiency. This means it will provide better performance in latency and scalability compared to any other outdoor system in its class.
The kit includes everything needed for easy installation.
Enhanced surge protection
Specifications |
|
| Dimensions | 189 x 189 x 125 mm (7.44 x 7.44 x 4.92") |
| Weight | 530 g (1.17 lb) |
| Enclosure material | UV-stabilized plastic |
| Mounting | Pole mount kit (Included) Wall mount (Not included) |
| Wind loading | 45.4 N at 200 km/h (10.2 lbf at 125 mph) |
| Wind survivability | 200 km/h (125 mph) |
| Hardware | |
| Networking interface | (2) GbE RJ45 ports |
| Power method | Passive PoE 2-pair (4, 5+; 7, 8 return) |
| Power supply | 24V, 0.5A gigabit PoE adapter (Included) |
| Supported voltage range | 20–27V DC |
| Max. power consumption | 8.5W |
| ESD/EMP protection | Air/contact: ± 24kV |
| LEDs | Power, Ethernet, (4) Signal strength |
| Salt fog test | IEC 68-2-11 (ASTM B117) Equivalent: MIL-STD-810 G method 509.5 |
| Vibration test | IEC 68-2-6 |
| Temperature shock test | IEC 68-2-14 |
| UV test | IEC 68-2-5 at 40° C (104° F) Equivalent: ETS 300 019-1-4 |
| Wind-driven rain test | ETS 300 019-1-4 Equivalent: MIL-STD-810 G method 506.5 |
| Ambient operating temperature | -40 to 80° C (-40 to 176 F) |
| Ambient operating humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| System | |
| Gain | 19 dBi |
| Channel sizes PtP Mode PtPM Mode | 10/20/30/40/50/60/80 MHz 10/20/30/40 MHz |
| Max. VSWR | 1.5:1 |
| Polarization | Dual linear |
| Operating Frequency (MHz) | |
| Worldwide | 5150-5875 MHz |
| USA U-NII-1 U-NII-2A U-NII-2C U-NII-3 |
5150-5250 MHz 5250-5350 MHz 5240-5725 MHz 5725-5850 MHz |
Datasheet
